Phone · Motorola · Moto Edge Plus 2023
Motorola Moto Edge Plus 2023 Logic Board Repair
Logic Board Repair guide for the Motorola Moto Edge Plus 2023
Before you begin
Tools
- Heat gun or hair dryer
- Suction cup tool
- Plastic prying tools
- Precision screwdriver set (Phillips #000)
- Plastic spudger
- Tweezers
Parts / materials
- Replacement logic board
- Back cover adhesive sticker
- Isopropyl alcohol (99%)
Safety
- Power off the device completely before beginning disassembly.
- Wear safety glasses to protect your eyes when heating glass panels.
- Wear an anti-static wrist strap to prevent electrostatic discharge damage.
Overview
Step-by-step
- 1
Heat the Back Glass
3 minApply heat around the edges of the rear glass panel for 2 to 3 minutes to soften the underlying adhesive.
- 2
Attach Suction Handle
1 minPlace a suction cup onto the lower portion of the rear glass near the bottom USB-C port.
- 3
Slice Back Cover Adhesive
4 minPull up on the suction cup to create a small gap, then insert a plastic opening pick under the seam.
- 4
Remove the Rear Glass
2 minSlide the pick around all perimeter edges to cut the adhesive, then lift and set aside the back glass.
- 5
Unscrew Upper Bracket Screws
3 minRemove the Phillips #000 screws securing the plastic wireless charging coil bracket to the frame.
- 6
Pry Off Midframe Bracket
2 minUse a plastic spudger to gently pry up and lift the wireless charging coil assembly out of the phone.
- 7
Disconnect Battery Connector
1 minPry the battery press connector straight up off the motherboard using a plastic spudger to cut power.
- 8
Disconnect Flex Cables
2 minDisconnect the main interconnect cable and display flex cable from their board sockets.
- 9
Disconnect Antenna Cables
2 minUse precision tweezers to pry up the white and black coaxial antenna connectors from the logic board.
- 10
Unscrew Logic Board Fasteners
2 minRemove the Phillips screws holding the top motherboard securely to the aluminum chassis.
- 11
Remove the Logic Board
2 minGently pry under the top edge of the logic board and lift it clear from the device frame.
- 12
Transfer Front Camera
2 minDisconnect the front camera flex cable from the old board and snap it into the new logic board.
- 13
Seat New Logic Board
3 minLower the replacement motherboard into the chassis and secure it with the Phillips screws.
- 14
Reconnect Board Connectors
3 minSnap the antenna leads, display, interconnect, and battery connectors firmly back into their sockets.
After your Motorola Moto Edge Plus 2023 logic board repair
Power the Moto Edge Plus 2023 back on and test the logic board repair function before you put every screw away. Check touch/display response, charging, cameras, buttons, and wireless as relevant to this repair. If something fails after closing the device, reopen carefully and reseat the connectors for this Motorola Moto Edge Plus 2023 job before assuming the part is defective. Keep leftover adhesive and screws labeled in case you need a second pass.
Prefer a professional repair?
Book Motorola Moto Edge Plus 2023 logic board repair at LML Repair in Seattle — same-day options available.
