Headphone · Shure · Shure SRH Plus
Shure SRH Plus Cable Repair
Cable Repair guide for the Shure Shure SRH Plus
Before you begin
Tools
- Precision screwdriver set
- Plastic prying tools
- Soldering iron
- Solder
- Tweezers
Parts / materials
- Replacement part or kit for cable repair (model-specific)
Safety
- Power off the Shure SRH Plus before starting
- Use anti-static protection when handling internal components
- Keep screws and small parts organized by step
Step-by-step
- 1
Power off the headphone
2 minShut down the Shure SRH Plus and disconnect chargers. Set up a clean, well-lit workspace before opening anything.
- 2
Remove exterior fasteners
4 minRemove the screws or clips securing the outer housing. Keep fasteners organized by position.
- 3
Open the housing
8 minUse heat and plastic tools where adhesive is present. Separate panels carefully to avoid cracking clips.
- 4
Disconnect power
3 minUnplug the battery or main power connector as soon as it is reachable.
- 5
Expose the repair area
8 minRemove shields, brackets, and cables blocking the fault area. Inspect for corrosion, debris, or loose connections.
- 6
Complete the cable repair
12 minClean contacts, reseat cables, or replace the damaged modular part as required for this cable repair on the Shure SRH Plus.
- 7
Test before closing
5 minReconnect power temporarily and verify the repaired function before finishing reassembly.
- 8
Reassemble and secure
8 minReverse the opening steps, reconnect all cables, replace screws, and close the housing flush.
- 9
Final verification
4 minPower on and confirm the repair plus related basics (touch, sound, charging, cameras) still work.
Conclusion
If the repaired function works and the device powers on normally, you are done. If something fails after closing the device, reopen carefully and reseat the connectors related to this repair before assuming the part is bad.
Prefer a professional repair?
Book Shure Shure SRH Plus cable repair at LML Repair in Seattle — same-day options available.
