Skip to main content

Phone · Samsung · Galaxy Fold 5G

Power Button Repair Guide for Galaxy Fold 5G

Power Button Repair guide for the Samsung Galaxy Fold 5G

Moderate
~45 min
8 steps

Before you begin

Tools

  • Phillips screwdriver #00
  • Plastic opening tools
  • Tweezers
  • Heat gun or hairdryer
  • Adhesive remover

Parts / materials

  • Replacement button assembly
  • Screwdriver set
  • Plastic opening tools
  • Adhesive strips
  • Cleaning solution

Safety

  • Disconnect battery before starting
  • Work in a clean, well-lit area
  • Handle components with care
  • Use proper ESD protection

Overview

Complete step-by-step guide for power button repair on Galaxy Fold 5G. This guide covers the entire repair process from diagnosis to completion. This DIY guide walks through power button repair on the Samsung Galaxy Fold 5G (Galaxy Z series phone). Before you open the device, confirm the exact model number on the Samsung settings screen or rear housing so your replacement part matches the Galaxy Fold 5G specifically—not a similar Galaxy Z sibling. Most DIY techs finish this Samsung Galaxy Fold 5G power button repair in about 45 minutes when parts and tools are ready. Difficulty is rated intermediate for this model. Recommended tools for this Samsung Galaxy Fold 5G job: Phillips screwdriver #00, Plastic opening tools, Tweezers, Heat gun or hairdryer, Adhesive remover. Parts and supplies: Replacement button assembly, Screwdriver set, Plastic opening tools, Adhesive strips, Cleaning solution. Power the Galaxy Fold 5G off completely, remove SIMs/SD cards if present, and work on a clean, well-lit surface with a magnetic mat for screws. If a step feels wrong for your Samsung Galaxy Fold 5G, stop and compare the connector layout to the photos in this guide. When you prefer a same-day pro repair in Seattle instead, LML Repair can handle power button repair for this model with tested parts and a workmanship warranty.

Step-by-step

  1. 1

    Prepare the Device

    5 min

    Power off the Galaxy Fold 5G completely and remove any case or screen protector. Gather all necessary tools and replacement parts.

  2. 2

    Remove Back Cover

    10 min

    Use a heat gun or hairdryer to warm the edges of the device. Carefully insert plastic opening tools to separate the back cover from the frame.

  3. 3

    Disconnect Battery

    3 min

    Locate the battery connector and carefully disconnect it using plastic tools. This is crucial for safety during the repair.

  4. 4

    Remove Power Button Assembly

    8 min

    Locate the power button assembly. Remove any screws holding it in place and carefully disconnect the ribbon cable.

  5. 5

    Install New Power Button

    7 min

    Position the new power button assembly in place. Reconnect the ribbon cable and secure with screws.

  6. 6

    Reconnect Battery

    3 min

    Carefully reconnect the battery connector. Ensure it's properly seated and secure.

  7. 7

    Test Functionality

    5 min

    Power on the device using the new power button. Test that it turns the device on and off correctly.

  8. 8

    Reassemble Device

    10 min

    Replace the back cover, ensuring all clips are properly engaged. Clean any fingerprints or debris from the device.

After your Samsung Galaxy Fold 5G power button repair

Power the Galaxy Fold 5G back on and test the power button repair function before you put every screw away. Check touch/display response, charging, cameras, buttons, and wireless as relevant to this repair. If something fails after closing the device, reopen carefully and reseat the connectors for this Samsung Galaxy Fold 5G job before assuming the part is defective. Keep leftover adhesive and screws labeled in case you need a second pass.

Prefer a professional repair?

Book Samsung Galaxy Fold 5G power button repair at LML Repair in Seattle — same-day options available.