Watch · Google · Google Pixel Watch
Google Pixel Watch Band Replacement
Band Replacement guide for the Google Google Pixel Watch
Before you begin
Tools
- Precision screwdriver set
- Plastic opening tools
- Tweezers
- Magnifying glass
- Anti-static wrist strap
Parts / materials
- Replacement part or kit for band replacement (model-specific)
Safety
- Power off the Google Pixel Watch before starting
- Use anti-static protection when handling internal components
- Keep screws and small parts organized by step
Overview
Step-by-step
- 1
Power off the smartwatch
2 minShut down the Google Pixel Watch completely. Remove the case and any cards or accessories before opening the device.
- 2
Remove exterior screws
4 minRemove the external screws that secure the housing. Keep them sorted by length and location.
- 3
Open the device housing
8 minWarm adhesive if needed, then use plastic picks to separate the housing without damaging clips or seals.
- 4
Disconnect the battery
3 minAs soon as you can reach it, unplug the battery connector with a plastic spudger before working on other cables.
- 5
Clear access to the band
8 minRemove shields, brackets, and cables blocking the band. Note cable routing before disconnecting anything.
- 6
Remove the old band
10 minDisconnect the old band, free adhesive or fasteners, and lift it out without tearing nearby flex cables.
- 7
Install the replacement band
10 minSeat the new band in the same orientation, reconnect flex cables firmly, and secure brackets or adhesive.
- 8
Test before final close
5 minReconnect the battery temporarily and power on. Confirm the repaired function works before finishing reassembly.
- 9
Reassemble the device
8 minPower off if needed, reverse the opening steps, replace screws, and close the housing flush.
- 10
Final function check
4 minPower on and re-check the repaired function plus basics like touch, charging, sound, and cameras when applicable.
After your Google Google Pixel Watch band replacement
Power the Google Pixel Watch back on and test the band replacement function before you put every screw away. Check touch/display response, charging, cameras, buttons, and wireless as relevant to this repair. If something fails after closing the device, reopen carefully and reseat the connectors for this Google Google Pixel Watch job before assuming the part is defective. Keep leftover adhesive and screws labeled in case you need a second pass.
Keep learning
Explore more Google Google Pixel Watch repair context in the encyclopedia, or open related DIY guides.
