Watch · Amazfit · Amazfit GTR 4
Amazfit GTR 4 Screen Replacement
Screen Replacement guide for the Amazfit Amazfit GTR 4
Before you begin
Tools
- Precision screwdriver set
- Plastic opening tools
- Tweezers
- Magnifying glass
- Anti-static wrist strap
- Screen removal tools
- Double-sided adhesive strips
Parts / materials
- Replacement part or kit for screen replacement (model-specific)
Safety
- Disconnect the battery before working near the display
- Handle glass carefully to avoid cuts
- Work slowly around flex cables
Overview
Step-by-step
- 1
Power off the smartwatch
2 minShut down the Amazfit GTR 4 completely. Remove the case and any cards or accessories before opening the device.
- 2
Remove exterior screws
4 minRemove the external screws that secure the housing. Keep them sorted by length and location.
- 3
Open the device housing
8 minWarm adhesive if needed, then use plastic picks to separate the housing without damaging clips or seals.
- 4
Disconnect the battery
3 minAs soon as you can reach it, unplug the battery connector with a plastic spudger before working on other cables.
- 5
Clear access to the screen
8 minRemove shields, brackets, and cables blocking the screen. Note cable routing before disconnecting anything.
- 6
Remove the old screen
10 minDisconnect the old screen, free adhesive or fasteners, and lift it out without tearing nearby flex cables.
- 7
Install the replacement screen
10 minSeat the new screen in the same orientation, reconnect flex cables firmly, and secure brackets or adhesive.
- 8
Test before final close
5 minReconnect the battery temporarily and power on. Confirm the repaired function works before finishing reassembly.
- 9
Reassemble the device
8 minPower off if needed, reverse the opening steps, replace screws, and close the housing flush.
- 10
Final function check
4 minPower on and re-check the repaired function plus basics like touch, charging, sound, and cameras when applicable.
After your Amazfit Amazfit GTR 4 screen replacement
Power the Amazfit GTR 4 back on and test the screen replacement function before you put every screw away. Check touch/display response, charging, cameras, buttons, and wireless as relevant to this repair. If something fails after closing the device, reopen carefully and reseat the connectors for this Amazfit Amazfit GTR 4 job before assuming the part is defective. Keep leftover adhesive and screws labeled in case you need a second pass.
Keep learning
Explore more Amazfit Amazfit GTR 4 repair context in the encyclopedia, or open related DIY guides.
