Tablet · Xiaomi · Xiaomi Pad 6S Pro
Xiaomi Pad 6S Pro Screen Replacement
Screen Replacement guide for the Xiaomi Xiaomi Pad 6S Pro
Before you begin
Tools
- Anti-static wrist strap
- Precision screwdriver set
- Plastic prying tools
- Heat gun or hair dryer
- Suction cups
- Guitar picks for prying
- Tweezers
- Clean workspace mat
- Screen removal tools
- Double-sided adhesive strips
Parts / materials
- Replacement part or kit for screen replacement (model-specific)
Safety
- Disconnect the battery before working near the display
- Handle glass carefully to avoid cuts
- Work slowly around flex cables
Overview
Step-by-step
- 1
Power off the tablet
2 minShut down the Xiaomi Pad 6S Pro completely. Remove the case and any cards or accessories before opening the device.
- 2
Remove exterior screws
4 minRemove the external screws that secure the housing. Keep them sorted by length and location.
- 3
Open the device housing
8 minWarm adhesive if needed, then use plastic picks to separate the housing without damaging clips or seals.
- 4
Disconnect the battery
3 minAs soon as you can reach it, unplug the battery connector with a plastic spudger before working on other cables.
- 5
Clear access to the screen
8 minRemove shields, brackets, and cables blocking the screen. Note cable routing before disconnecting anything.
- 6
Remove the old screen
10 minDisconnect the old screen, free adhesive or fasteners, and lift it out without tearing nearby flex cables.
- 7
Install the replacement screen
10 minSeat the new screen in the same orientation, reconnect flex cables firmly, and secure brackets or adhesive.
- 8
Test before final close
5 minReconnect the battery temporarily and power on. Confirm the repaired function works before finishing reassembly.
- 9
Reassemble the device
8 minPower off if needed, reverse the opening steps, replace screws, and close the housing flush.
- 10
Final function check
4 minPower on and re-check the repaired function plus basics like touch, charging, sound, and cameras when applicable.
After your Xiaomi Xiaomi Pad 6S Pro screen replacement
Power the Xiaomi Pad 6S Pro back on and test the screen replacement function before you put every screw away. Check touch/display response, charging, cameras, buttons, and wireless as relevant to this repair. If something fails after closing the device, reopen carefully and reseat the connectors for this Xiaomi Xiaomi Pad 6S Pro job before assuming the part is defective. Keep leftover adhesive and screws labeled in case you need a second pass.
Keep learning
Explore more Xiaomi Xiaomi Pad 6S Pro repair context in the encyclopedia, or open related DIY guides.
