Step-by-step

1. 1

   Power off the tablet

   2 min

   Shut down the Apple iPad Pro 11 4th Gen and disconnect chargers. Set up a clean, well-lit workspace before opening anything.

2. 2

   Remove exterior fasteners

   4 min

   Remove the screws or clips securing the outer housing. Keep fasteners organized by position.

3. 3

   Open the housing

   8 min

   Use heat and plastic tools where adhesive is present. Separate panels carefully to avoid cracking clips.

4. 4

   Disconnect power

   3 min

   Unplug the battery or main power connector as soon as it is reachable.

5. 5

   Expose the repair area

   8 min

   Remove shields, brackets, and cables blocking the fault area. Inspect for corrosion, debris, or loose connections.

6. 6

   Complete the face id repair

   12 min

   Clean contacts, reseat cables, or replace the damaged modular part as required for this face id repair on the Apple iPad Pro 11 4th Gen.

7. 7

   Test before closing

   5 min

   Reconnect power temporarily and verify the repaired function before finishing reassembly.

8. 8

   Reassemble and secure

   8 min

   Reverse the opening steps, reconnect all cables, replace screws, and close the housing flush.

9. 9

   Final verification

   4 min

   Power on and confirm the repair plus related basics (touch, sound, charging, cameras) still work.