Skip to main content

Phone · Samsung · Galaxy S5 Mini

Samsung Galaxy S5 Mini Battery Replacement

Battery Replacement guide for the Samsung Galaxy S5 Mini

Moderate
~24 min
23 steps

Before you begin

Tools

  • Plastic opening tools
  • Spudger
  • Anti-static wrist strap
  • Microfiber cloth

Parts / materials

  • Replacement Samsung Galaxy S5 Mini battery
  • Isopropyl alcohol

Safety

  • Power down the device completely before removing the battery.
  • Do not puncture, bend, or apply pressure to the lithium-ion battery.
  • Handle old and new batteries away from heat sources and liquid.

Overview

# Samsung Galaxy S5 Mini Battery Replacement Repair Guide Action-specific battery replacement walkthrough for the Samsung Galaxy S5 Mini. About 24 minutes across 23 steps. This DIY guide walks through battery replacement on the Samsung Galaxy S5 Mini (Galaxy S series phone). Before you open the device, confirm the exact model number on the Samsung settings screen or rear housing so your replacement part matches the Galaxy S5 Mini specifically—not a similar Galaxy S sibling. Most DIY techs finish this Samsung Galaxy S5 Mini battery replacement in about 24 minutes when parts and tools are ready. Difficulty is rated intermediate for this model. Recommended tools for this Samsung Galaxy S5 Mini job: Plastic opening tools, Spudger, Anti-static wrist strap, Microfiber cloth. Parts and supplies: Replacement Samsung Galaxy S5 Mini battery, Isopropyl alcohol. Power the Galaxy S5 Mini off completely, remove SIMs/SD cards if present, and work on a clean, well-lit surface with a magnetic mat for screws. If a step feels wrong for your Samsung Galaxy S5 Mini, stop and compare the connector layout to the photos in this guide. When you prefer a same-day pro repair in Seattle instead, LML Repair can handle battery replacement for this model with tested parts and a workmanship warranty.

Step-by-step

  1. 1

    Power Off Phone

    1 min

    Press and hold the Power button on the right edge of the device, then select Power Off on the screen.

  2. 2

    Attach Anti-Static Strap

    1 min

    Put on your anti-static wrist strap and clip the alligator end to a grounded metal object.

  3. 3

    Locate Rear Cover Notch

    1 min

    Find the small pry notch located near the top corner of the rear cover.

  4. 4

    Insert Plastic Opening Tool

    1 min

    Insert the flat edge of a plastic opening tool into the rear cover notch.

  5. 5

    Pry Top Edge Open

    1 min

    Gently twist the opening tool to disengage the top plastic retaining clips.

  6. 6

    Unclip Left Side

    1 min

    Slide the plastic opening tool down the left seam of the phone to release the side tabs.

  7. 7

    Unclip Bottom Edge

    1 min

    Move the opening tool along the bottom edge to pop free the lower retention clips.

  8. 8

    Unclip Right Side

    1 min

    Slide along the right edge of the device to detach the remaining cover tabs.

  9. 9

    Remove Rear Cover

    1 min

    Lift the rear cover completely off the body of the device and place it face down.

  10. 10

    Inspect Water Seal

    1 min

    Examine the integrated rubber seal on the inside of the back cover for dust or damage.

  11. 11

    Locate Battery Bay Notch

    1 min

    Identify the small recess at the bottom edge of the battery compartment.

  12. 12

    Pry Up Old Battery

    1 min

    Insert a spudger into the battery notch and pry the battery upward from the bay.

  13. 13

    Remove Depleted Battery

    1 min

    Lift the battery out of the housing and place it in a safe, non-conductive area.

  14. 14

    Inspect Battery Terminals

    1 min

    Check the phone's gold contact pins for bending, dirt, or corrosion.

  15. 15

    Clean Battery Contacts

    1 min

    Lightly wipe the gold contacts inside the battery bay using a microfiber cloth dampened with isopropyl alcohol.

  16. 16

    Unpack New Battery

    1 min

    Remove the new replacement battery from its protective packaging and inspect it for defects.

  17. 17

    Align Battery Terminals

    1 min

    Position the replacement battery so its gold contacts line up with the pins in the phone compartment.

  18. 18

    Insert Top Battery Edge

    1 min

    Lower the contact end of the battery into the top of the bay first.

  19. 19

    Press Battery Into Place

    1 min

    Press down firmly on the bottom half of the battery until it rests flush inside the housing.

  20. 20

    Position Rear Cover

    1 min

    Align the rear cover over the back of the device, ensuring the camera cutout matches correctly.

  21. 21

    Snap Rear Cover Clips

    1 min

    Press firmly along all edges of the rear cover until you hear every clip snap shut.

  22. 22

    Power On Phone

    1 min

    Press and hold the Power button until the Samsung Galaxy boot logo appears on screen.

  23. 23

    Test Device Charging

    2 min

    Plug in a micro-USB charging cable to verify that the phone correctly displays the charging indicator.

After your Samsung Galaxy S5 Mini battery replacement

Power the Galaxy S5 Mini back on and test the battery replacement function before you put every screw away. Check touch/display response, charging, cameras, buttons, and wireless as relevant to this repair. If something fails after closing the device, reopen carefully and reseat the connectors for this Samsung Galaxy S5 Mini job before assuming the part is defective. Keep leftover adhesive and screws labeled in case you need a second pass.

Keep learning

Explore more Samsung Galaxy S5 Mini repair context in the encyclopedia, or open related DIY guides.

logo_footer

Stay in the loop

Get new guides, reviews, and repair news.

© 2026 LML Repair. All rights reserved.