Skip to main content

Phone · Samsung · Galaxy S4 Active

Samsung Galaxy S4 Active Microphone Repair

Microphone Repair guide for the Samsung Galaxy S4 Active

Moderate
~27 min
16 steps

Before you begin

Tools

  • Phillips #00 Screwdriver
  • Spudger tool
  • Plastic prying tools
  • Tweezers
  • Anti-static wrist strap

Parts / materials

  • Replacement microphone daughterboard assembly
  • Isopropyl alcohol (99%)
  • Cleaning wipes

Safety

  • Power off the device entirely before beginning repair to reduce electrical risk.
  • Handle the removable lithium-ion battery carefully without applying pressure or puncturing it.
  • Wear an anti-static wrist strap to prevent electrostatic damage to internal circuitry.

Overview

# Samsung Galaxy S4 Active Microphone Repair Repair Guide Action-specific microphone repair walkthrough for the Samsung Galaxy S4 Active. About 27 minutes across 16 steps. This DIY guide walks through microphone repair on the Samsung Galaxy S4 Active (Galaxy S series phone). Before you open the device, confirm the exact model number on the Samsung settings screen or rear housing so your replacement part matches the Galaxy S4 Active specifically—not a similar Galaxy S sibling. Most DIY techs finish this Samsung Galaxy S4 Active microphone repair in about 27 minutes when parts and tools are ready. Difficulty is rated intermediate for this model. Recommended tools for this Samsung Galaxy S4 Active job: Phillips #00 Screwdriver, Spudger tool, Plastic prying tools, Tweezers, Anti-static wrist strap. Parts and supplies: Replacement microphone daughterboard assembly, Isopropyl alcohol (99%), Cleaning wipes. Power the Galaxy S4 Active off completely, remove SIMs/SD cards if present, and work on a clean, well-lit surface with a magnetic mat for screws. If a step feels wrong for your Samsung Galaxy S4 Active, stop and compare the connector layout to the photos in this guide. When you prefer a same-day pro repair in Seattle instead, LML Repair can handle microphone repair for this model with tested parts and a workmanship warranty.

Step-by-step

  1. 1

    Power Off Phone

    1 min

    Press and hold the Power button, then tap Power Off on the screen. Ensure the device shuts down completely before proceeding.

  2. 2

    Remove Rear Cover

    1 min

    Insert a plastic opening tool or fingernail into the notch near the power button. Pry the rear cover away from the chassis.

  3. 3

    Remove Battery

    1 min

    Insert a fingernail into the recess at the bottom of the battery compartment. Lift the battery up and remove it from the device.

  4. 4

    Remove MicroSD and SIM

    1 min

    Push the microSD card inward until it clicks, then pull it out. Slide the micro-SIM card straight out of its slot.

  5. 5

    Unscrew Midframe

    3 min

    Use a Phillips #00 screwdriver to remove the 12 screws securing the inner midframe to the phone chassis.

  6. 6

    Unclip Midframe Assembly

    3 min

    Insert a spudger between the midframe edge and the glass display. Pry around the outer edge to release the plastic clips and remove the midframe.

  7. 7

    Disconnect Daughterboard Cable

    1 min

    Use the flat end of a spudger to pry up the microphone daughterboard flex connector from the motherboard.

  8. 8

    Disconnect Antenna Cables

    2 min

    Use tweezers or a spudger to pry the lower ends of the coaxial antenna cables straight up off the daughterboard.

  9. 9

    Pry Up Microphone Assembly

    2 min

    Insert a plastic spudger beneath the bottom daughterboard containing the primary microphone and micro-USB port. Carefully pry the board up from the chassis adhesive.

  10. 10

    Install Replacement Daughterboard

    2 min

    Position the new microphone daughterboard into the bottom slot. Press down firmly to seat the microphone and USB port in the frame.

  11. 11

    Reconnect Antenna Cables

    2 min

    Align the antenna coaxial connectors over their sockets on the daughterboard. Gently snap them straight down into place.

  12. 12

    Reconnect Daughterboard Cable

    1 min

    Align the main daughterboard flex cable over its connector on the motherboard and press down until it snaps closed.

  13. 13

    Reattach Midframe

    2 min

    Place the midframe onto the rear of the phone display assembly. Press along the outer perimeter until all plastic tabs snap shut.

  14. 14

    Secure Midframe Screws

    3 min

    Reinstall the 12 Phillips #00 screws to secure the midframe tightly against the display housing.

  15. 15

    Reinsert Cards and Battery

    1 min

    Slide the SIM card and microSD card into their respective slots. Reinsert the battery matching the gold contacts.

  16. 16

    Reattach Rear Cover

    1 min

    Align the back cover over the rear of the device. Press firmly around all edges to properly seal the rubber water-resistance gasket.

After your Samsung Galaxy S4 Active microphone repair

Power the Galaxy S4 Active back on and test the microphone repair function before you put every screw away. Check touch/display response, charging, cameras, buttons, and wireless as relevant to this repair. If something fails after closing the device, reopen carefully and reseat the connectors for this Samsung Galaxy S4 Active job before assuming the part is defective. Keep leftover adhesive and screws labeled in case you need a second pass.

Keep learning

Explore more Samsung Galaxy S4 Active repair context in the encyclopedia, or open related DIY guides.

logo_footer

Stay in the loop

Get new guides, reviews, and repair news.

© 2026 LML Repair. All rights reserved.