Skip to main content

Phone · OnePlus · OnePlus 7

OnePlus OnePlus 7 Rear Camera Repair

Rear Camera Repair guide for the OnePlus OnePlus 7

Moderate
~60 min
8 steps

Before you begin

Tools

  • Phillips screwdriver #00
  • Plastic opening tools
  • Tweezers
  • Heat gun or hairdryer
  • Adhesive remover
  • Anti-static wrist strap

Parts / materials

  • Replacement camera module
  • Adhesive strips
  • Cleaning solution
  • Anti-static mat
  • Rear camera assembly
  • Camera bracket

Safety

  • Disconnect battery before starting
  • Work in a clean, well-lit area
  • Handle components with care
  • Use proper ESD protection

Overview

Complete step-by-step guide for rear camera repair on OnePlus 7. This guide covers the entire repair process from diagnosis to completion. This DIY guide walks through rear camera repair on the OnePlus OnePlus 7 (OnePlus series phone). Before you open the device, confirm the exact model number on the OnePlus settings screen or rear housing so your replacement part matches the OnePlus 7 specifically—not a similar OnePlus sibling. Most DIY techs finish this OnePlus OnePlus 7 rear camera repair in about 60 minutes when parts and tools are ready. Difficulty is rated intermediate for this model. Recommended tools for this OnePlus OnePlus 7 job: Phillips screwdriver #00, Plastic opening tools, Tweezers, Heat gun or hairdryer, Adhesive remover, Anti-static wrist strap. Parts and supplies: Replacement camera module, Adhesive strips, Cleaning solution, Anti-static mat, Rear camera assembly, Camera bracket. Power the OnePlus 7 off completely, remove SIMs/SD cards if present, and work on a clean, well-lit surface with a magnetic mat for screws. If a step feels wrong for your OnePlus OnePlus 7, stop safely, compare the connector layout to the photos in this guide, and re-check that your part matches this exact model. When you are unsure, read related guides for the same OnePlus series or browse related common problems before forcing a connector.

Step-by-step

  1. 1

    Prepare the Device

    5 min

    Power off the OnePlus 7 completely and remove any case or screen protector. Gather all necessary tools and replacement parts.

  2. 2

    Remove Back Cover

    10 min

    Use a heat gun or hairdryer to warm the edges of the device. Carefully insert plastic opening tools to separate the back cover from the frame.

  3. 3

    Disconnect Battery

    3 min

    Locate the battery connector and carefully disconnect it using plastic tools. This is crucial for safety during the repair.

  4. 4

    Remove Rear Camera Assembly

    10 min

    Locate the rear camera assembly. Remove any screws holding it in place and carefully disconnect the ribbon cable.

  5. 5

    Install New Rear Camera

    12 min

    Position the new rear camera assembly in place. Reconnect the ribbon cable and secure with screws.

  6. 6

    Reconnect Battery

    3 min

    Carefully reconnect the battery connector. Ensure it's properly seated and secure.

  7. 7

    Test Functionality

    5 min

    Power on the device and test the camera functionality. Take test photos to ensure the camera works correctly.

  8. 8

    Reassemble Device

    10 min

    Replace the back cover, ensuring all clips are properly engaged. Clean any fingerprints or debris from the device.

After your OnePlus OnePlus 7 rear camera repair

Power the OnePlus 7 back on and test the rear camera repair function before you put every screw away. Check touch/display response, charging, cameras, buttons, and wireless as relevant to this repair. If something fails after closing the device, reopen carefully and reseat the connectors for this OnePlus OnePlus 7 job before assuming the part is defective. Keep leftover adhesive and screws labeled in case you need a second pass.

Keep learning

Explore more OnePlus OnePlus 7 repair context in the encyclopedia, or open related DIY guides.

logo_footer

Stay in the loop

Get new guides, reviews, and repair news.

© 2026 LML Repair. All rights reserved.