Phone · OnePlus · Nord N100
OnePlus Nord N100 Speaker Repair
Speaker Repair guide for the OnePlus Nord N100
Before you begin
Tools
- Phillips #00 screwdriver
- Plastic opening picks
- Spudger
- SIM card eject tool
- Tweezers
Parts / materials
- Replacement OnePlus Nord N100 loudspeaker module
- Isopropyl alcohol (99%)
- Cotton swab
Safety
- Ensure the device is powered off before starting the repair.
- Wear safety glasses to protect eyes from potential plastic micro-shards.
- Do not puncture or apply direct force to the lithium-ion battery.
Overview
Step-by-step
- 1
Power Off the Phone
1 minPress and hold the power button, then tap Power Off on the screen. Verify the device is completely powered down before continuing.
- 2
Eject the SIM Tray
1 minInsert a SIM eject pin into the hole on the left edge of the phone. Push firmly until the tray pops out, then remove it.
- 3
Insert Opening Pick
2 minInsert a plastic opening pick into the seam between the plastic rear cover and the display frame near the SIM slot.
- 4
Unclip Rear Cover
3 minSlide the pick around the perimeter of the phone to disengage the plastic retention clips holding the back cover.
- 5
Lift Off Back Cover
2 minCarefully separate the rear cover from the main frame and set it aside.
- 6
Unscrew Loudspeaker Cover
3 minUse a Phillips #00 screwdriver to remove the seven screws securing the lower loudspeaker housing.
- 7
Pry Up Loudspeaker Assembly
2 minInsert the flat end of a spudger beneath the edge of the loudspeaker module and lever it up to release it.
- 8
Remove Old Loudspeaker
1 minLift the loudspeaker assembly out of the bottom section of the phone chassis.
- 9
Clean Sub-board Contacts
2 minLightly brush the gold contact pads on the lower sub-board with a drop of isopropyl alcohol on a cotton swab.
- 10
Install New Loudspeaker
2 minPosition the replacement loudspeaker module into the lower cavity and press down until it sits flush.
- 11
Tighten Module Screws
3 minReinstall and tighten the seven Phillips #00 screws to secure the speaker module to the sub-board frame.
- 12
Reattach Rear Cover
2 minAlign the rear cover with the phone chassis and press firmly along the edges until all clips snap shut.
- 13
Reinsert SIM Tray
1 minSlide the SIM card tray back into its slot on the side of the device until fully flush.
- 14
Test Audio Output
2 minPower on the device and play a ringtone or media file to verify the new speaker functions properly.
After your OnePlus Nord N100 speaker repair
Power the Nord N100 back on and test the speaker repair function before you put every screw away. Check touch/display response, charging, cameras, buttons, and wireless as relevant to this repair. If something fails after closing the device, reopen carefully and reseat the connectors for this OnePlus Nord N100 job before assuming the part is defective. Keep leftover adhesive and screws labeled in case you need a second pass.
Keep learning
Explore more OnePlus Nord N100 repair context in the encyclopedia, or open related DIY guides.
