Phone · OnePlus · Nord 2 5G
OnePlus Nord 2 5G Speaker Repair
Speaker Repair guide for the OnePlus Nord 2 5G
Before you begin
Tools
- Heat gun or hair dryer
- Suction cup tool
- Plastic prying tools
- Phillips #000 screwdriver
- Spudger tool
- Tweezers
Parts / materials
- Replacement bottom speaker for OnePlus Nord 2 5G
- Pre-cut back cover adhesive sticker
- 99% Isopropyl alcohol
- Microfiber cleaning cloth
Safety
- Power off the device completely before starting disassembly.
- Wear protective safety glasses when applying heat to glass panels.
- Avoid using sharp metal tools near the internal battery.
Overview
Step-by-step
- 1
Power Off Device
1 minPress and hold the power button, then select power off on the screen to completely shut down the device.
- 2
Eject SIM Tray
1 minInsert a SIM eject tool or paperclip into the small hole on the bottom left edge to eject the SIM tray.
- 3
Heat Back Cover
3 minApply heat evenly along the edges of the rear glass cover for two minutes using a heat gun.
- 4
Attach Suction Cup
1 minPlace a suction cup near the bottom edge of the glass back cover and gently pull up to create a tiny gap.
- 5
Insert Opening Pick
2 minInsert a thin plastic opening pick into the gap between the rear glass and the frame.
- 6
Slice Rear Adhesive
3 minSlide the pick carefully around all four edges to slice through the pre-applied adhesive holding the back glass.
- 7
Remove Back Panel
2 minLift the rear glass cover straight off the device and place it on a clean surface.
- 8
Unscrew Lower Module
3 minUse a Phillips #000 screwdriver to remove the 7 screws holding down the lower speaker assembly housing.
- 9
Pry Up Speaker Unit
2 minInsert the flat end of a spudger under the edge of the speaker cover module and gently pry it upward.
- 10
Remove Old Speaker
1 minLift the entire loudspeaker assembly out from the bottom portion of the chassis.
- 11
Clean Assembly Recess
2 minUse tweezers and a microfiber cloth dampened with isopropyl alcohol to clean out dust and adhesive residue.
- 12
Install New Speaker
2 minPosition the replacement loudspeaker module into the housing, ensuring the spring contacts line up properly.
- 13
Secure Speaker Screws
3 minReinstall and tighten the 7 Phillips #000 screws to secure the new speaker module in place.
- 14
Apply New Adhesive
3 minAlign and apply a fresh pre-cut adhesive strip onto the outer edge of the frame.
- 15
Reattach Rear Glass
2 minAlign the rear glass panel over the frame and press firmly around all edges to create a tight seal.
- 16
Reinsert SIM Tray
1 minPush the SIM tray firmly back into its slot until it rests flush against the frame.
After your OnePlus Nord 2 5G speaker repair
Power the Nord 2 5G back on and test the speaker repair function before you put every screw away. Check touch/display response, charging, cameras, buttons, and wireless as relevant to this repair. If something fails after closing the device, reopen carefully and reseat the connectors for this OnePlus Nord 2 5G job before assuming the part is defective. Keep leftover adhesive and screws labeled in case you need a second pass.
Keep learning
Explore more OnePlus Nord 2 5G repair context in the encyclopedia, or open related DIY guides.
