Skip to main content
logo

Phone · Motorola · Moto G30

Motorola Moto G30 Screen Replacement

Screen Replacement guide for the Motorola Moto G30

Difficult
~53 min
24 steps

Before you begin

Tools

  • Heat gun or hair dryer
  • Phillips #00 screwdriver
  • Plastic prying tools
  • Suction cup tool
  • Spudger tool
  • Tweezers
  • SIM eject tool

Parts / materials

  • Replacement Moto G30 screen
  • Double-sided adhesive strips
  • Isopropyl alcohol (90%+)
  • Cleaning wipes

Safety

  • Wear safety glasses to protect eyes from cracked glass splinters.
  • Always disconnect the battery flex cable before touching motherboard components.
  • Keep heating temperatures under 80°C to prevent battery thermal damage.

Overview

# Motorola Moto G30 Screen Replacement Repair Guide Action-specific screen replacement walkthrough for the Motorola Moto G30. About 53 minutes across 24 steps. This DIY guide walks through screen replacement on the Motorola Moto G30 (Moto G series phone). Before you open the device, confirm the exact model number on the Motorola settings screen or rear housing so your replacement part matches the Moto G30 specifically—not a similar Moto G sibling. Most DIY techs finish this Motorola Moto G30 screen replacement in about 53 minutes when parts and tools are ready. Difficulty is rated advanced for this model. Recommended tools for this Motorola Moto G30 job: Heat gun or hair dryer, Phillips #00 screwdriver, Plastic prying tools, Suction cup tool, Spudger tool, Tweezers, SIM eject tool. Parts and supplies: Replacement Moto G30 screen, Double-sided adhesive strips, Isopropyl alcohol (90%+), Cleaning wipes. Power the Moto G30 off completely, remove SIMs/SD cards if present, and work on a clean, well-lit surface with a magnetic mat for screws. If a step feels wrong for your Motorola Moto G30, stop and compare the connector layout to the photos in this guide. When you prefer a same-day pro repair in Seattle instead, LML Repair can handle screen replacement for this model with tested parts and a workmanship warranty.

Step-by-step

  1. 1

    Power off the phone

    1 min

    Press and hold the Power button, then tap Power Off on the screen.

  2. 2

    Eject the SIM tray

    1 min

    Insert a SIM eject tool into the hole on the left edge of the phone to remove the card tray.

  3. 3

    Heat the rear cover

    2 min

    Use a heat gun or hair dryer on low setting to warm the outer edges of the back panel for two minutes.

  4. 4

    Slice rear cover adhesive

    5 min

    Attach a suction cup to the lower back panel and insert a plastic pick under the seam to slice around the perimeter.

  5. 5

    Disconnect the fingerprint sensor

    2 min

    Slightly lift the rear panel and use a spudger to detach the fingerprint reader ribbon cable from the motherboard.

  6. 6

    Unscrew the motherboard cover

    3 min

    Remove the Phillips #00 screws securing the top plastic motherboard shield.

  7. 7

    Remove the motherboard cover

    1 min

    Pry up and remove the plastic motherboard cover using a plastic spudger.

  8. 8

    Disconnect the battery cable

    1 min

    Use a spudger to pop the battery connector straight up off the motherboard socket.

  9. 9

    Unscrew the lower speaker housing

    2 min

    Remove the Phillips #00 screws securing the loudspeaker module at the bottom of the phone.

  10. 10

    Remove the speaker housing

    1 min

    Lift the speaker module out of the lower chassis with tweezers.

  11. 11

    Disconnect the display flex cable

    1 min

    Unplug the display ribbon cable from its motherboard connector using a spudger.

  12. 12

    Heat the front display

    2 min

    Apply heat evenly around the outer front glass edges for two minutes to soften the adhesive.

  13. 13

    Separate the broken screen

    5 min

    Insert a thin plastic pick under the display edge and slice the adhesive along all four sides.

  14. 14

    Remove the display assembly

    2 min

    Lift the screen away from the frame while guiding the display flex cable through the frame slot.

  15. 15

    Clean old frame adhesive

    4 min

    Scrape away remaining glue from the display frame using a spudger and isopropyl alcohol.

  16. 16

    Apply new screen adhesive

    4 min

    Place double-sided adhesive strips along the thin inner lip of the frame.

  17. 17

    Thread new screen flex cable

    2 min

    Feed the flexible display cable of the replacement screen through the frame cutout.

  18. 18

    Set new screen into frame

    2 min

    Align the glass carefully with the frame and press firmly around all edges to secure it.

  19. 19

    Reconnect the display cable

    1 min

    Press the display flex connector directly onto its socket on the motherboard.

  20. 20

    Reconnect the battery cable

    1 min

    Snap the battery flex connector back onto the motherboard socket.

  21. 21

    Reinstall speaker housing

    2 min

    Set the lower speaker module back into position and tighten its Phillips #00 screws.

  22. 22

    Reinstall motherboard cover

    3 min

    Place the upper motherboard shield down and replace all saved Phillips #00 screws.

  23. 23

    Reconnect fingerprint sensor

    2 min

    Attach the back cover's fingerprint cable back into its motherboard connector.

  24. 24

    Reseal the back panel

    3 min

    Apply fresh adhesive tape to the back frame and press the rear cover back into place.

After your Motorola Moto G30 screen replacement

Power the Moto G30 back on and test the screen replacement function before you put every screw away. Check touch/display response, charging, cameras, buttons, and wireless as relevant to this repair. If something fails after closing the device, reopen carefully and reseat the connectors for this Motorola Moto G30 job before assuming the part is defective. Keep leftover adhesive and screws labeled in case you need a second pass.

Keep learning

Explore more Motorola Moto G30 repair context in the encyclopedia, or open related DIY guides.

Repair encyclopediaAll Moto G30 guides
logo_footer

Stay in the loop

Get new guides, reviews, and repair news.

Quick Links

Explore

    © 2026 LML Repair. All rights reserved.