Phone · Motorola · Moto G Power 2022
Motorola Moto G Power 2022 Speaker Repair
Speaker Repair guide for the Motorola Moto G Power 2022
Before you begin
Tools
- Precision screwdriver set (Phillips #00)
- Plastic prying tools
- Suction cup tool
- Heat gun or hair dryer
- Spudger tool
- SIM card eject tool
Parts / materials
- Replacement loudspeaker module
- Isopropyl alcohol (99%)
- Pre-cut back cover adhesive
Safety
- Power off the phone completely before starting to prevent electrical shorts.
- Wear safety glasses while using a heat gun near glass or plastic components.
- Use plastic prying tools around internal boards to avoid damaging circuits.
Overview
Step-by-step
- 1
Power off phone
1 minPress and hold the power button, then select power off to shut down the device completely.
- 2
Eject SIM tray
1 minInsert a SIM eject tool into the pinhole on the left side of the frame and pull out the tray.
- 3
Heat back cover perimeter
2 minWarm the edges of the plastic back cover with a heat gun for two minutes to soften internal adhesive.
- 4
Create opening gap
2 minPress a suction cup onto the lower back cover and pull upward while inserting a plastic prying pick into the seam.
- 5
Slice perimeter clips
3 minSlide the plastic pick carefully around all sides of the phone to unclip the rear panel from the frame.
- 6
Remove rear panel
1 minLift the rear panel straight up and remove it from the phone chassis.
- 7
Unscrew loudspeaker housing
3 minUse a Phillips #00 screwdriver to remove the seven screws securing the lower speaker assembly.
- 8
Pry out speaker module
2 minInsert the flat end of a spudger beneath the loudspeaker housing lip and gently lever it upward to detach.
- 9
Insert replacement speaker
2 minPosition the new loudspeaker module into the lower cavity and press down until it sits flush.
- 10
Drive speaker screws
3 minReinstall the seven Phillips #00 screws to firmly attach the speaker housing to the frame.
- 11
Snap back cover closed
2 minAlign the rear cover with the phone body and press firmly along the perimeter until all clips click into place.
- 12
Insert SIM card tray
1 minPush the SIM card tray back into its slot on the frame until flush.
After your Motorola Moto G Power 2022 speaker repair
Power the Moto G Power 2022 back on and test the speaker repair function before you put every screw away. Check touch/display response, charging, cameras, buttons, and wireless as relevant to this repair. If something fails after closing the device, reopen carefully and reseat the connectors for this Motorola Moto G Power 2022 job before assuming the part is defective. Keep leftover adhesive and screws labeled in case you need a second pass.
Keep learning
Explore more Motorola Moto G Power 2022 repair context in the encyclopedia, or open related DIY guides.
