Skip to main content

Laptop · Dell · Dell Inspiron 16 5640

Dell Inspiron 16 5640 Trackpad Replacement

Trackpad Replacement guide for the Dell Dell Inspiron 16 5640

Moderate
~90 min
10 steps

Before you begin

Tools

  • Precision screwdriver set
  • Plastic prying tools
  • Spudger tool
  • Anti-static wrist strap
  • Tweezers
  • Clean workspace mat

Parts / materials

  • Replacement part or kit for trackpad replacement (model-specific)

Safety

  • Power off the Dell Inspiron 16 5640 before starting
  • Use anti-static protection when handling internal components
  • Keep screws and small parts organized by step

Overview

# Dell Inspiron 16 5640 Trackpad Replacement Repair Guide ## Overview This guide walks you through trackpad replacement on your Dell Inspiron 16 5640 (Dell Inspiron laptop). Replace damaged or non-functioning trackpad ## Before You Begin - Read the entire guide first - Gather all tools and replacement parts - Work on a clean, well-lit surface - Back up data if the device still powers on ## Stuck or unsure? Pause and compare your symptoms with our [troubleshooting guides](/guides) and [common problems](/problems) before forcing a step.

Step-by-step

  1. 1

    Power off the laptop

    2 min

    Shut down the Dell Inspiron 16 5640 completely. Remove the case and any cards or accessories before opening the device.

  2. 2

    Remove exterior screws

    4 min

    Remove the external screws that secure the housing. Keep them sorted by length and location.

  3. 3

    Open the device housing

    8 min

    Warm adhesive if needed, then use plastic picks to separate the housing without damaging clips or seals.

  4. 4

    Disconnect the battery

    3 min

    As soon as you can reach it, unplug the battery connector with a plastic spudger before working on other cables.

  5. 5

    Clear access to the trackpad

    8 min

    Remove shields, brackets, and cables blocking the trackpad. Note cable routing before disconnecting anything.

  6. 6

    Remove the old trackpad

    10 min

    Disconnect the old trackpad, free adhesive or fasteners, and lift it out without tearing nearby flex cables.

  7. 7

    Install the replacement trackpad

    10 min

    Seat the new trackpad in the same orientation, reconnect flex cables firmly, and secure brackets or adhesive.

  8. 8

    Test before final close

    5 min

    Reconnect the battery temporarily and power on. Confirm the repaired function works before finishing reassembly.

  9. 9

    Reassemble the device

    8 min

    Power off if needed, reverse the opening steps, replace screws, and close the housing flush.

  10. 10

    Final function check

    4 min

    Power on and re-check the repaired function plus basics like touch, charging, sound, and cameras when applicable.

After your Dell Dell Inspiron 16 5640 trackpad replacement

Power the Dell Inspiron 16 5640 back on and test the trackpad replacement function before you put every screw away. Check touch/display response, charging, cameras, buttons, and wireless as relevant to this repair. If something fails after closing the device, reopen carefully and reseat the connectors for this Dell Dell Inspiron 16 5640 job before assuming the part is defective. Keep leftover adhesive and screws labeled in case you need a second pass.

Keep learning

Explore more Dell Dell Inspiron 16 5640 repair context in the encyclopedia, or open related DIY guides.

logo_footer

Stay in the loop

Get new guides, reviews, and repair news.

© 2026 LML Repair. All rights reserved.